Panasonic VB-44210G Скачать руководство пользователя страница 166

Страница: 166 / 394

Chapter 4. Key Telephone Features

Section 700 - Operation

4-50

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

“ENTER FWD EXT#” appears on the display.

6. Press

the

AUTO

key.

7. Enter the Speed Dial code (System Speed dial 00-89 or Personal Speed

dial 90-99 or 900-909).

Note:

The speed dial code must include the

CONF

key (to indicate a

trunk call), the appropriate trunk access code, and the outside number.

8. Press

the

HOLD

key.

Calls will now be forwarded according to the forwarding type selected.

To assign Call Forwarding to a Hunt Group pilot number or an
extension number to an FF key:

1. Press

the

ON/OFF

key.

2. Press

the

PROG

key.

3. Press the FF key to be programmed.

“Enter Code” appears on the display.

4. Enter

“72.”

5. Enter the Call Forwarding code (0, 1, 2, or 4).

6. Enter the Hunt Group pilot number or an extension number.

7. Press

the

HOLD

key.

To erase a code stored in an FF key:

Note: FF keys assigned as CO lines cannot be cleared using the following
procedure. CO line keys can only be cleared through system programming

1. Press

the

ON/OFF

key.

2. Press

the

PROG

key.

3. Press the FF key to be programmed.

“Enter Code” appears on the display.

4. Press

the

HOLD

key.

“Code Cleared” appears.

Содержание VB-44210G











































































































































































































































































































































































































Результаты поиска

Содержание VB-44210G

Отзывы:

Похожие инструкции для VB-44210G

Бренды по названию

Популярные бренды

Panasonic VB-44210G, Руководство пользователя

Результаты поиска

Содержание VB-44210G

Отзывы:

Похожие инструкции для VB-44210G

Бренды по названию

Популярные бренды