33
Using the Auto Pop-up Flash
The Built-in Flash enables you to record still pictures in a dark place.
1
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >>
[FLASH] >> [ON] or [AUTO].
≥
If [AUTO] is selected, the [
ß
A
] Indication is displayed when in a dark
place and the Video Flash will be lit.
2
Press the [CAMERA STILL] Button.
≥
Video Flash
1
pops up and is lit automatically, and the image
becomes still.
3
Press the [PHOTO SHOT] Button or Recording Start/Stop
Button.
≥
Flash is not lit, when the Palmcorder is in recording mode.
≥
After recording, close the Video Flash by pressing on it.
≥
Do not cover the Flash Sensor
2
with your hand during recording.
Adjusting Brightness of the Flash
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >> [FLASH LEVEL]
>> a desired Flash Level.
≥
For recording under normal conditions, set it to [NORMAL]. (The [
ß
]
Indication
3
appears.)
≥
If the brightness is not enough in [NORMAL] setting, set it to [
i
] (the [
ß
i
]
Indication appears), if it is too bright, set it to [
j
] (the [
ß
j
] Indication
appears).
To reduce the “Red Eye” effect
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >>
[RED EYE REDUCTION] >> [ON].
≥
The [
£
] Indication
4
appears.
≥
Even if the [RED EYE REDUCTION] is set to [ON], you still may get “red
eyes phenomenon” depending on recording conditions.
≥
For other notes concerning this item, see 69.
ß
£
4 3
OF
F O
N MODE
3
2
3
PHOTO
SHOT
2
1
1
M E N U
CAMERA STILL
PUSH
SHUTTER/IRIS/
VOL/JOG
PV-DV953P.book 33 ページ ２００３年１月１６日 木曜日 午後６時５４分
