23
CLOCK SET
PUSH MENU TO RETURN
YEAR
:2003
MONTH :OCT
DAY :20
HOUR : 8PM
MINUTE:46
1, 3
1, 2
M E N U
PUSH
SHUTTER/IRIS/
VOL/JOG
ZOOM MIC ON
1
2
REC SPEED
SP LP
AUDIO REC 12bit
RETURN ---- YES
SCENEINDEX 2HOUR
WIND CUT OFF
RECORDING SETUP
PUSH MENU TO EXIT
ZOOM MIC ON
FLASH ON
RED EYE REDUCTION OFF
FLASH LEVEL NORMAL
REC SPEED SP
AUDIO REC
12bit
16bit
RETURN ---- YES
SCENEINDEX 2HOUR
WIND CUT OFF
RECORDING SETUP
PUSH MENU TO EXIT
FLASH ON
RED EYE REDUCTION OFF
FLASH LEVEL NORMAL
CAMERA FUNCTIONS
PUSH MENU TO EXIT
1.CAMERA SETUP
2.ADVANCED FUNCTIONS
3.DIGITAL EFFECT
4.CARD SETUP
6.RECORDING SETUP
7.DISPLAY SETUP
8.OTHER FUNCTIONS
9.DEMO MODE
5.MULTI-PICTURES
Setting Date and Time
1
Press the [MENU] Button and rotate the [PUSH] Dial to select
[OTHER FUNCTIONS] >> [CLOCK SET] >> [YES].
2
Rotate and press the [PUSH] Dial to select [YEAR]/[MONTH]/
[DAY]/[HOUR]/[MINUTE] and set it to a desired value.
≥
Year will cycle in the order shown below.
2000
)
2001
)
...
)
2089
)
2000
)
...
3
Press the [MENU] Button to finish setting the date and time.
≥
The clock operation starts from [00] seconds.
≥
The menu will disappear when the [MENU] Button is pressed again.
≥
It is possible that the built-in clock in the Palmcorder may become
inaccurate. Please check the time before recording. If the [
0
] Indication is
flashing, charge the built-in lithium battery and reset the date and time.
~~~~~~~~~~~~~~~~~~~~~~~~~
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation of the clock. When the [
0
]
Indication
1
is lit, the internal lithium battery is almost or already discharged.
1
Connect the AC Adaptor to the Palmcorder with the power
turned off and then connect to the AC Jack.
≥
After charging for 4 hours, the built-in lithium battery can power the
clock for approximately 3 months.
~~~~~~~~~~~~~~~~~~~~~~~~~
LP Mode
A desired recording speed can be selected with [REC SPEED] on the
[RECORDING SETUP] Sub-Menu.
1
If LP Mode is selected, the recording time becomes 1.5 times longer
than that of SP Mode.
Although the image quality does not decrease with the LP Mode recording,
mosaic-like noise patterns may appear on a playback image, or some normal
functions may be restricted.
≥
The contents that are recorded in LP Mode are not completely compatible
with other equipment.
≥
Audio Dubbing is not possible with LP Mode.
(
l
41)
~~~~~~~~~~~~~~~~~~~~~~~~~
Audio Recording Mode
The sound quality of the recorded sound can be selected with [AUDIO REC]
on the [RECORDING SETUP] Sub-Menu.
2
High sound-quality recording is possible with “16bit 48kHz 2 track” Mode.
With the “12bit 32kHz 4 track” Mode, the original sound can be recorded on
2 tracks in stereo, while the other 2 tracks can be used for re-recording.
1
1
PV-DV953P.book 23 ページ ２００３年１月１６日 木曜日 午後６時５４分
