29
1
WIND CUT
1
M E N U
PUSH
SHUTTER/IRIS/
VOL/JOG
Wind Noise Reduction Function
This function reduces the noise that the wind makes as it hits the microphone
during recording.
1
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >>
[WIND CUT] >> [ON].
≥
The [WIND CUT] Indication
1
appears.
To Cancel the Wind Noise Reduction Function
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >> [WIND CUT] >>
[OFF].
≥
It does not work with an external microphone.
≥
When it is set to [ON], directivity of microphone is regulated depending on
the strength of wind to reduce wind noise.
~~~~~~~~~~~~~~~~~~~~~~~~~
Recording in Special Situations
(Program AE)
Select optimal automatic exposures under specific recording situations.
1
Set the Mode Selector Switch to [MANUAL].
≥
The [MNL] Indication appears.
2
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[PROG.AE] >> a desired Mode [
5
], [
7
], [
4
], [
Ω
], [
º
].
≥
The Indication of the selected Mode is displayed.
[
5
] Sports Mode
1
For recording scenes involving quick movements, such as sports scenes.
[
7
] Portrait Mode
2
Focuses on the main subject of the image and leaves the background slightly
out of focus.
[
4
] Low Light Mode
3
Preserves the mood of dim light settings without altering picture brightness.
[
Ω
] Spotlight Mode
4
Neutralizes the additional brightness created by a spotlight.
[
º
] Surf & Snow Mode
5
Compensates for excessive illumination from sun glare to produce a clear
picture.
Canceling the Program AE Function
Set [PROG.AE] on the [CAMERA SETUP] Sub-Menu to [OFF]. Or, set the
Mode Selector Switch to [AUTO].
≥
For other notes, see page 68.
~~~~~~~~~~~~~~~~~~~~~~~~~
Recording with a Fixed Brightness
(AE Lock Function)
This is a function for setting a fixed brightness. When recording in light with
an extreme difference in the brightness of the background and the subject,
such as a person standing in front of a dark background, the person can be
recorded brightly if the brightness is adjusted to the person.
1
After setting to Camera Mode, press the [W/T] zoom Lever
toward [T] and zoom in to the part you want to record.
2
Set the Mode Selector Switch to [AE LOCK].
≥
The [
] Indication
1
flashes to indicate that the brightness is
fixed. Afterwards, it lights up white.
To fix your desired brightness
After Step 1, set the [AUTO/MANUAL/AE LOCK] Switch to [MANUAL] to
adjust the brightness manually and then set the [AUTO/MANUAL/AE LOCK]
Switch to [AE LOCK].
To cancel AE Lock Function
Set the Mode Selector Switch to [AUTO] or [MANUAL].
≥
Set the AE Lock again when [TAPE/CARD/CARD MODE] Selector is
switched after the AE Lock has been set. (The brightness setting may be
changed.)
AE
LOCK
1
3
2
4
5
1
AUTO
MANUAL
AE LOCK
FOCUS
W.B.
2
M E N U
PUSH
SHUTTER/IRIS/
VOL/JOG
1/60
F3.4
0dB
1
AE
LOCK
1
2
AUTO
MANUAL
AE LOCK
FOCUS
W.B.
W
T
PV-DV953P.book 29 ページ ２００３年１月１６日 木曜日 午後６時５４分
