Panasonic Panafax DX-2000, Руководство по обслуживанию

Страница: 186 / 322

186
581 XMT B Sub-address Password transmission to a unit
that has their DIS bit 50 (NSF bit 156) OFF. Sub-address transmission to a unit that has no
Sub-address function.
601 XMT - ADF Door was opened during ADF
transmission.
623 XMT A No document was in the ADF. (Built-in dialer
engaged) Operator removed the document from the ADF
after dialing was completed.
Document is not set properly in the ADF.
630 XMT or
RCV(Polling) B Redial count over. No dial tone detected.
Sensor dial tone is not detected. (country
dependent)
Busy tone is detected. (country dependent)
T1 timer (35±5 sec) elapsed without a signal
from the receiver.
631 XMT A "STOP" button was pressed during Auto Dialing.
634 XMT - Redial count over with no response or busy tone
was not detected.
Note: U.S.A. models will redial only once if busy
tone is not detected.
Canadian models will not redial when the
communication fails due to no response from
the called station.
638 XMT - Power turned off with applicable data in memory
or during communication. Power switched off.
Power failure occurred.
710 XMT
RCV LAN Command Response between LANC/LANB
PCB timed out. Defective LANC/LANB PCB.
712 XMT LAN Unknown email address replied from the Mail
Server. Mail Server received an incorrect email
address.
(Dependent on Server’s Mail application)
713 XMT LAN Memory overflow in the LAN Interface. The document data exceeded 1.6 Mbyte/page
and cannot be sent.
714 XMT
RCV LAN LAN Interface error.
Cannot logon to the LAN. The 10Base-T cable is not connected.
An unexpected LAN problem occurred.
Check the LANC/LANB PCB connector.
715 XMT LAN TCP/IP connection timed out. Incorrect IP Address is set.
Verify the IP Address, Default Router IP
Address, SMTP Server IP Address.
716 XMT LAN Cannot logon to the LAN. Incorrect SMTP Server IP Address is set.
No email application is activated on the Mail
Server.
717 XMT LAN Incomplete SMTP Protocol transmission. Mail Server’s hard disk may be full.
Mail Server is defective.
718 XMT LAN Page Memory Overflow occurred while
receiving printing data. The paper size selected
within your application to print is larger than the
paper size loaded in the cassette(s). Check the document size and resolution.
Ask originator to re-send in a supported size
and resolution.
719 RCV LAN Received data via LAN is in a format that is not
supported. Ask the originator to re-send with a supported
file attachment:
*In a TIFF-F format.
*Image data conforming to A4/Letter size.
720 POP LAN Unable to connect with the POP Server. Incorrect POP Server address is set.
POP Server is down.
721 POP LAN Unable to login to the POP Server. Incorrect User Name or Password is set.
725 XMT
POP LAN DNS Server connection timed out. Incorrect DNS Server address is set.
DNS Server is down.
726 XMT
POP LAN Received an error response from the DNS
Server. Incorrect POP Server address is set.
Incorrect SMTP Server address is set.
730 RCV LAN Unable to program the Internet parameters or
the autodialer with Email from a PC. Verify that the Fax Parameter #158 is set to 2:
Valid.
731 RCV LAN Dialer full while Relayed Transmission
Request was received. Dial buffer for manual number dialing
(70 stations) are being used.
800 Relay Comm. - The machine was requested to relay a
document but has no Relay Hub capability.
814 Conf. XMT
Conf. Polling
Relay Comm. The remote station does not have Relay XMT
nor Confidential Communication capability.
815 Conf. RCV Mailbox is full.
816 Conf. Polled The received Polling Password did not match.
825 Conf. RCV
Conf. Polled Parameter settings of the remote station are not
properly set.
Information Codes
Code Mode Phase Description of Problem Cause