Panasonic Live Production Suite Series, Руководство по эксплуатации

Страница: 56 / 176

– 56 –
Chapter 5 Basic Operations — Wipe
3
Select [Page Turn] in the R menu, and set [Size], [Radius], and [Angle] in the encoder menu.
[Size] Set the size when reduced.
[Radius] Set the radius for the Page Turn effect.
[Angle] Set the angle for the Page Turn effect.
Ripple effect settings
Set the following pattern waveforms.
f
3D: 109
The set ripple amount is implemented when the transition amount reaches 50%, then the transition continues while the MIX composition is performed.
f
3D: 110
The set ripple amount is implemented on the border parts of the circular wipe.
1
Select the <ME1>/<ME2> button → [BKGD] → [Pos/Modify] tab.
2
Select the item in [Light].
[OFF] A lighting effect is not added.
[ON] A lighting effect is added.
f
This setting is also applied to the following pattern waveforms.
- 3D: 99, 100, 101, 102
3
Select [Ripple] in the R menu, and set [Amplitude], [Frequency], and [Speed] in the encoder menu.
[Amplitude] Set the wave amplitude.
[Frequency] Set the wave frequency.
[Speed] Set the speed that the wave moves.
Setting spin effects
A spin effect can be added during the background transition.
1
Select the <ME1>/<ME2> button → [BKGD] → [Pos/Modify] tab.
2
Select the items in the [Spin Mode] column.
[Off] Does not spin regardless of setting value of [X-Spin], [Y-Spin], and [Z-Spin].
[Trans Spin] Spins in specified amount of spin depending on the transition.
[Auto Spin]* Spins in speed in accordance with specified amount of spin regardless of the transition.
[Manual Spin]* Tilts in specified amount of spin regardless of the transition.
* It may become discontinuous at the edge of transition in the [Auto Spin] or [Manual Spin] modes.
3
Select [Spin] in the R menu, and set [X-Spin], [Y-Spin], and [Z-Spin] in the encoder menu.
f
This sets the amount of rotation of the spin effect during background transition.
f
An effect can be added to the following pattern waveforms.
- [Z-Spin]
WIPE: 1 - 15, 17
SQ: 42 - 45
- [X-Spin], [Y-Spin], [Z-Spin]
SQ: 41, 51 - 54
Setting the Multi Pattern effect
The wipe pattern can be divided to the specified number.
f
Enabled when the following pattern waveform is selected.
- WIPE
1
Select the <ME1>/<ME2> button
→
[BKGD]
→
[Modify] tab.
2
Set the specification method of the number of division in [H/V Sync] of the [Multi] column.
[ON] Makes the number of division the same in horizontal and vertical directions.
[OFF] Different number of division can be specified for horizontal and vertical directions.
3
Set the number of division in horizontal and vertical direction in [H] and [V] of the [Multi] column.
Setting the Modulation effect
An effect to ripple the wipe edge can be added.
f
Enabled when the following pattern waveforms are selected.
- WIPE: Except 24 (Free Wipe)