Panasonic Live Production Suite Series, Руководство по эксплуатации

Страница: 127 / 176

– 127 –
Chapter 8 System Menu — ME unit settings
Setting the ME1 PVW/ME2 PVW output
A preview signal of the BKGD and KEY1, KEY2 which were selected in the next transaction can be output.
Select [Key1], [Key2] from the <ME1>/<ME2> button on the top menu
→ [KEY1], [KEY2] → [Chroma] → [Sample] → [Chroma PVW] to switch to the
preview screen for chroma key adjustment of the corresponding keyer.
1
Select the <SYS> button → [ME SETTINGS] → [ME1,2] tab.
2
Select an item in [Key1], [Key2], [PinP1], [PinP2] in the [ME1 PVW]/[ME2 PVW] column.
[Off] Does not output signals.
[On] Outputs the preview signal of the corresponding keyer.
3
Select an item in [Chroma PVW] in the [ME1 PVW]/[ME2 PVW] column.
[Enable] Displays the preview screen for chroma key adjustment in each preview output.
[Disable] Does not display the preview screen for chroma key adjustment in each preview output.
Setting the DSKPGM1/DSKPGM2 output
Selects the video to be the base of DSKPGM1 and DSKPGM2.
1
Open the <SYS> button
→
[DSK SETTINGS]
→
[DSK Assign] tab.
2
Select an item in the [DSK Assign] column
→
[Assign Mode].
[Common]
f
Makes the base video for DSKPGM1 and DSKPGM2 the same.
Setting of the [DSK Assign] column
→
[DSKPGM1] is applied to both DSKPGM1 and DSKPGM2.
[Each]
f
Different base videos can be set for DSKPGM1 and DSKPGM2.
Settings of the [DSK Assign] column
→ [DSKPGM1] and [DSKPGM2] are applied to DSKPGM1 and DSKPGM2
respectively.
3
Select an item in the [DSK Assign] column
→
[DSKPGM1]/[DSKPGM2].
[ME1PGM], [ME2PGM] ME1PGM and ME2PGM will be the base video, respectively.
[ME1CLN], [ME2CLN] ME1CLN and ME2CLN will be the base video, respectively.
f
For details of ME1CLN and ME2CLN output settings, refer to “Setting the ME1 CLN/ME2 CLN output”.
Setting DSKPVW1/DSKPVW2 output
The unit can output 2 signals for preview output and clean output in addition to the DSKPGM1 or DSKPGM2 for program output as the DSK output.
f
DSKPVW1: Signal for preview of DSKPGM1
f
DSKPVW2: Signal for preview of DSKPGM2
Following signals can be assigned to the DSKPVW2 in addition to the signal for preview of DSKPGM2.
f
DSK1PVW: Signal for individual preview of DSK1
f
DSK2PVW: Signal for individual preview of DSK2
1
Select the <SYS> button
→
[DSK SETTINGS]
→
[DSK Out1]/[DSK Out2] tab.
2
Select an item in [Type], [DSK1], [DSK2] in the [DSK PGM1]/[DSK PGM2] column.
f
Set [DSK PGM1]/[DSK PGM2].
3
Select an item in [Type], [DSK1], [DSK2] in the [DSK PVW1]/[DSK PVW2] column.
f
Set [DSK PVW1]/[DSK PVW2].
4
Select an item in [Type], [DSK1], [DSK2] in the [DSK EXT1-1]/[DSK EXT1-2]/[DSK EXT2-1]/[DSK EXT2-2] column.
f
Set [DSK EXT1-1]/[DSK EXT1-2]/[DSK EXT2-1]/[DSK EXT2-2].
5
Select an item in [Priority DSK1], [Priority DSK2] in the [Priority DSK1-2] column.