Panasonic KX-TVS125, Руководство по установке

Страница: 49 / 476

2.5 INSTALLATION STEPS
Installation Manual 49
2.5 INSTALLATION STEPS
The following is an overview of the standard installation process using DPT Integration. When
necessary, other sections in this manual have been referenced for more detailed descriptions
or instructions.
1.
Obtain a list of current users, their extension numbers, their departments, and the type of
systems they use (mailbox, no mailbox, beeper, car phone, etc.).
2.
Assess your customers' needs before setting up the system. You will save yourself time
later by giving customers what they need up front. Ask the office manager how the VPS
will be used. Give examples.
Recommend that your customer use a word processor to log the greetings. You will find
these files much more easily than the worksheet pages if you need to make changes
down the road.
3.
Connect the power cord to the VPS, then turn power switch on.
CAUTION
The power supply cord is used as the main disconnect device. Ensure that the
socket-outlet is located/installed near the equipment and is easily accessible.
4.
If necessary, install optional port expansion cards (see 2.6 INSTALLING PORT
EXPANSION CARDS: KX-TVS102 OR KX-TVS204).
5.
Standard Initialization (For DPT Integration Connection)
a)
Program the ports of the PBX for voice processing (see Section 4 INTEGRATING
THE VPS WITH THE PANASONIC KX-T DIGITAL PBX).
Program the KX-TD500, the KX-TD1232, the KX-TA1232, the KX-TD816, the
KX-TD308, the KX-TDA series, or the KX-TAW series for Voice Mail integration.
• KX-TD500, KX-TD816, KX-TD1232, KX-TA1232, KX-TD308, KX-TDA
series, KX-TAW series
Program may be performed on-site or at the office.
All memory is stored and will be retained when the unit is powered up as
long as the DIP/Rotary Switch has been reset to position [0] prior to
turning the unit off.
b)
Turn the power switch off at the VPS.
c)
Plug station wire(s) from the PBX into VPS (see 2.7 CONNECTIONS).
d)
Connect the personal computer to the VPS with a Null Modem Cable (see 2.8.2
Connecting the RS-232C Cable).
e)
Set the DIP/Rotary Switch to position 5.
f)
Turn the power switch back on at the VPS.
g)
Wait until the "warning" appears on the screen.
h)
Set the DIP/Rotary Switch back to position 0.