Panasonic KX-TVS125, Руководство по установке

Страница: 288 / 476

B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS
288 Installation Manual
Direct Mailbox
Access 1. Yes
2. No
(Yes)
If set to "Yes", a subscriber is able to directly enter
Subscriber Service. This is accomplished by calling a
VPS extension directly from the subscriber’s extension.
The Subscriber Service Access Code (" " and mailbox
number) need not be dialed. Password entry may be
required if specified beforehand.
Note
The Direct Mailbox Access feature is only available
if DPT Voice Mail Integration is activated with a
Panasonic KX-T series telephone system.
Remote Call FWD
to CO 1. Yes
2. No
(No)
If set to "Yes", Remote Call Forwarding can be set to an
outside (CO) line; a subscriber can program his
extension from a remote location to forward various
types of calls to either "Telephone No.1" or "Telephone
No.2" (preprogrammed in the Mailbox Setting), or to any
other telephone number.
Note
The Remote Call FWD to CO feature is available if
DPT Voice Mail Integration is activated with a
Panasonic KX-T series telephone system.
Notice
With respect to PBX programming, it is possible that
"Call Forward to CO" is disabled. To enable VPS
Remote Call Forwarding, the KX-TD1232, for
example, must be programmed properly. For the
COS of the extensions whose calls are to be
forwarded to a CO line, enable the following: [504]
Call Forward to Outside Line.
Play System
Prompt after
Personal Greeting 1. Yes
2. No
(No)
If set to "Yes", directions for recording a message are
given to the caller immediately after the personal
greeting has been played.
The following guidance messages are played:
"To end recording, hang up or press 1 for more features".
"To pause and restart recording, press 2".
Use Call Waiting
on Busy 1. Yes
2. No
(No)
If set to "Yes", the VPS signals the busy extension that
another call is waiting.
Note
To use Call Waiting on Busy, you must also enable
the use of the Call Waiting feature at your PBX.
Table B-7
Parameter Value Range
(Default)
Description/Function