Panasonic KX-TVS125, Руководство по установке

Страница: 342 / 476

B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS
342 Installation Manual
Other Parameters-Fax Management
You can program the VPS to automatically forward incoming fax calls to a fax extension. You
can specify a maximum of 2 fax extensions as the destination for the Automatic Fax Transfer.
If the main fax extension is not available to receive a fax, the VPS will forward the fax
transmission to the alternate fax extension.
No Answer
Time for
Intercom
Paging 1-30 s
(5)
Specifies the length of time (in seconds) the VPS
must wait before concluding Intercom Paging when
there is no answer.
The VPS will return to the caller if the paged party
does not respond before this timer expires.
Announcement
Repeat Cycle 1-3 times
(1)
Specifies the number of times to announce the
intercom page.
Example:
"I have a call for (mailbox owner’s name)".
Intercom
Paging Retry 1-10 times
(2)
Specifies the number of times to retry paging when
the paging destination is busy or if there is no
answer.
Note
This setting applies only when the subscriber
has enabled "Intercom Paging" in Incomplete
Call Handling Status.
Paging Code
for Group 1-16 Up to 12 digits
consisting of
0-9, ,# for each
group
(KX-TVS125/
KX-TVS225:
Group 1-8:
331-338;
All Groups
[Group 17]: 33 )
or
(KX-TVS325:
Group 1-16:
3301-3316;
All Groups
[Group 17]: 33 )
Specifies the intercom paging access code
required by the PBX.
Note
The Intercom Paging Group Number available
for each subscriber is determined on a COS-
by-COS basis.
Paging Code
for All Groups
Table B-37
Parameter Value Range
(Default)
Description/Function