Panasonic KX-TDA0480, Руководство по установке

Страница: 24 / 174

Planning
24 Installation Manual
DNS Setup
Use the DNS Setup section to set the receiving figures of the KX-TDA0480 starting address
translation.
When an H.323 Gatekeeper is not used in the IP Gateway network, the KX-TDA0480 internal
DNS are used to perform telephone number-to-IP address translation.
See Appendix A3 of this document.
SNMP Setup
If an SNMP compatible network management system is present, use the SNMP Setup section
of the worksheet to record information about available Trap IP addresses and the facility's
Community name.
SNMP Simple Network Management Protocol is a TCP/IP Protocol suite Application Layer
utility that provides a mechanism to manage and control network equipment from a central
console system. The KX-TDA0480 report any error codes or fault codes to the central console
(Network Management System NMS) by sending out Traps.
Trap IP 1 (SNMP_TRPDST)
Record the IP address for the first Trap Transmission facility. The IP address must conform to
Internet Protocol addressing requirements, e.g. nnn.nnn.nnn.nnn, where nnn = a value of 0 to
255 excluding 0.0.0.0 and 255.255.255.255.
There is no default value for this field.
In the sample, there is no Trap 1 IP address.
Common Configuration Worksheet
Group Name(s)
DNS SETUP
Search Digits:
(2)
SNMP Setup
Trap 1 IP: Trap 2 IP:
Trap 3 IP: Community
Name: (public)
Gatekeeper
Gatekeeper 1 IP: Gatekeeper 2 IP:
Notify E-mail
SNMP Primary
IP:
SNMP Secondary
IP:
E-mail 1: E-mail 2: