Panasonic KX-T336, Справочное руководство системы

Страница: 928 / 1605

9-D-4
(70695)
Automatic Route Selection Enables or disables the ARS (Automatic Route Selection) feature.
Numbering Plan Selects the type of numbering plan; The user can assign the desired
feature numbers or use the default setting 1 or 2.
Privacy on DN Key Determines whether or not a PITS telephone user is allowed to barge in
on an existing conversation on a PDN, SDN or SCO button.
Restriction Level-Operator Assigns the restriction level for calls to the telephone company operator
from an extension.
Restriction Level- Assigns the restriction level for international calls from an extension.
International
Home Dialing Plan Selects the home dialing plan. This setting applies to ARS, EQA and
OCC calls.
DSS Operation Mode When “With Transfer” is selected, allows the DSS console operator to
transfer the CO call to an extension user by simply pressing the associ-
ated DN•DSS button on the DSS console.
When “Without Transfer” is selected the CO call is disconnected when
the DN•DSS button is pressed.
Busy Tone Selects busy tone 1 or 2. Busy tone 2 has a unique pattern allowing
users with automatic release SLT's an extended amount of time to enter
codes when encountering a busy party.
Held Call Reminder When assigned to Yes, the system reminds the user that there is a call on
hold. When disabled there is no reminder tone given to the user. In either
case the call will be disconnected after 30 minutes if it is not retrieved.
Beep Tone for Bsy-ovr/ If “Yes” is selected, a beep tone will be heard when executing Busy
Brg-in Override or Barge-in. If “No” is selected, there will not be any tone
heard when Busy Override or Barge-in is executed.
External Paging 1, 2 Assigns external pagers 1 and 2 .
External Music Source 1, 2 Either Internal or External Music Source can be used depending on the
(for areas other than U.S.A. selection of the Music Source Selector Switch.
and Canada)
Idle Line Preference This assignment applies to a PITS telephone when “Idle Line Preference-
Calling” is assigned on it. If “DN” is selected, an idle DN button is auto-
matically seized by simply going off-hook, and an idle CO button is seized
automatically if “CO” is selected.
FDN for General Assigns the FDN (Floating Directory Number) for General Operator Call.
Operator Call This is used for the following attendant-seeking calls: DID, DISA, Call
Forwarding and Overflowed UCD calls.
There are two entries to allow for two tenants.
PBX Code Required when your KX-T336 is a part of a TIE Line Network.
Description of Assigning Items
Tenant Service Enables or disables the Tenant Service feature.