Panasonic KX-T336, Справочное руководство системы

Страница: 305 / 1605

2.00 Off Premise Extension
(OPX)
Description
Single line telephones installed off the premise
can be operated via a public or private network in
exactly the same way as extension which are on
the premise.
Up to 80 Off Premise Extensions can be installed
per system.
The OPX card and OPX Power Unit are required.
OPX must be set in the “Configuration-Slot
Assignment.”
Programming
Conditions
When an incoming call is placed to OPX, ringing
is heard in all the CO line incoming patterns.
A doorphone incoming call cannot be sent to an
OPX telephone.
System Programming
Reference
VT Dumb
“Configuration-Slot Assignment” 10-C-2.00 9-C-2.00
3.00 Walking Station
Description
It is possible to move an extension to a new
location without re-programming.
When moving a telephone, dial the feature
number for “Walking Station Set” at both the
source and destination telephones.
After the move, dial the feature number for
“Walking Station Cancel” and the original
extension number of the moved extension.
Up to two telephones in a system can be moved
simultaneously.
Before executing this function, assign “System-
Class of Service (1/2)”, Walking Station to “Yes”
for the extension.
Programming
Conditions
It is possible to move a telephone to an extension
which is in the pre-install status. In this case, dial
the feature number for “Walking Station Set” only
at the extension to be moved, and dial the feature
number for “Walking Station Cancel” and the
original extension number at the destination
extension.
With a PITS, this function is executed from a
PDN.
The telephone type (PITS, SLT, OPX) must be the
same at the source and destination.
If a busy tone is heard when dialing the feature
number for “Walking Station Cancel” and the
extension number, it means that the moving
extension is being used (possibly by another
station with an SDN of the moving station) and
the function cannot be completed. In cases like
this, dial again. If your PITS has a display, it
shows: Try Again
Dialing the feature number for “Walking Station
Cancel” and the extension number at the move
destination in a PITS cannot be done with the SP-
PHONE on.
First lift the handset and then proceed.
System Programming
Reference
VT Dumb
“System-Class of Service (1/2)”,
Walking Station
“System-Numbering Plan (07/11)”,
Walking Station Set
Walking Station Cancel
10-C-7.00
10-C-10.00
9-D-4.01
9-D-6.07
3-F-3
(70695)