Panasonic KX-T336, Справочное руководство системы

Страница: 1348 / 1605

12-C-21
6.00 Call Waiting Tone Selection
Used to choose desired call waiting tone type
from Tone 1 and Tone 2.
For further information about call waiting tone,
refer to Section 4-D-7.00 “Call Waiting.”
The explanation of the message display applies
only to a PITS provided with the display.
Result
Operation Comment/Note
• This display is called “Initial
display for PITS station
programming mode.”
• If the following message
appears on the display, the
programming data of your
PITS has already been
accessed by another
administration device.
Already accessed
• From now on, in any status,
pressing the END button
restores this status.
• If nothing is entered within one
minute after dialing “02,” “Initial
display for PITS station
programming mode” is shown
again on the display.
• To change the assignment,
simply dial the appropriate
number again.
1. Set the MEMORY switch at
the rear of PITS to
“PROGRAM.”
2. Dial “02.”
3. To change the preset tone
type, dial the number
corresponding to the desired
call waiting tone.
• To set the call waiting tone 1,
dial “1.”
• To set the call waiting tone 2,
dial “2.”
• The following message
appears on the display:
PIT-PGM No.?
• The MEMORY button indicator
lights in red.
• The preset tone type appears
on the display:
<Example>
C.W. Tone-1
• The MEMORY button indicator
light goes out.
• The following message
appears on the display:
C.W. Tone-1
• The following message
appears on the display:
C.W. Tone-2
SET• • PROGRAM
MEMORY
Continued