Panasonic KX-T336, Справочное руководство системы

Страница: 575 / 1605

Operation
Recording OGM from PITS (For Operation from
Attendant Console, refer to Section 6-J-8.00
“Outgoing Message (OGM) Recording and Playing
Back.”)
1. Lift the handset or press the SP-
PHONE button.
• You hear dial tone 1 or 3 or 4.
2. Dial the feature number for OGM
Record “791” (default) and the
resource number (1 to 4) in
succession.
(Resource number)
1 : OGM1 for UCD
2 : OGM2 for UCD
3 : OGM for DISA
4 : OGM for W-UP (Wake-up)
• The MEMORY indicator flashes
in red 60 wink, confirmation tone
3 is heard.
• If your PITS has a display, it
shows:
xxxxxxxx Rec. : 00
Indicates recording
time, counts up by
second.
UCD-OGM1 or
UCD-OGM2 or
DISA-OGM or Wkup-OGM
3. Begin your message.
4. As soon as you finish, press the
MEMORY button.
• The MEMORY indicator lights in
red.
• After confirmation tone 3
sounds, the recorded message
is played back automatically.
• If your PITS has a display, it
shows:
xxxxxxxx Play : 00
Indicates playback
time, counts up by
second.
UCD-OGM1 or
UCD-OGM2 or
DISA-OGM or Wkup-OGM
• When playback is finished, the
MEMORY indicator goes out.
You hear confirmation tone 3,
then no tone.
5. Replace the handset or press the
SP-PHONE button.
(Supplement)
In step 3 if 30 seconds is over, recording is
terminated and playback starts automatically.
Accordingly, it is not necessary to execute step 4
afterward.
In step 3 if you wish to change the message
during recording, you can start recording again
by dialing “
*
.”
In step 4 if you wish to interrupt and finish
playback, press the MEMORY button.
4-I-26
(40993)