Panasonic KX-T336, Справочное руководство системы

Страница: 1012 / 1605

9-E-11
(70695)
Destination (DIL 1:N only) Assigns destination type and number only when “Incoming Mode (Day)” is
Type and Number set to DIL 1: N (the function which enables an incoming call from one CO
line in one trunk group to arrive at one to eight destinations simultaneously
without assistance of operator).
Orderly setting is not necessary and inserting blanks between the items is
permissible.
DID Digit Modification Table Assigns the digit modification table to be used for DID calls. This allows
the DID incoming digits to be modified to match the numbering plan.
PBX Access Code (No In behind PBX or Centrex operation it is necessary for the system to
Restriction) send an access code to the host PBX or Centrex followed by a pause.
This feature assigns the access code to be sent.
PBX Access Code This is the same as PBX Access Code with Pause except that the digits
(Restriction) following the access code are checked by the system for toll restriction.
Max. Dial No. after EFA Assigns maximum dialing digits after sending EFA (External Feature
Signal Access) signal.
The following item is assignable when "Type" of the Trunk Group is set to any type other than "TIE."
CO-TIE Restriction
Used to restrict or not outside users from "Calling from CO to TIE."
To restrict, set to "Yes." To allow, set to "No."
The following four items are assignable when "Type" of the Trunk Group is set to "TIE."
TIE-CO Restriction
Used to restrict or not extension users from "Calling from TIE to CO."
To restrict, set to "Yes." To allow, set to "No."
TIE Forced Account Used to allow certain extension users "Calling from TIE to CO."
Code Mode If set to "Yes", an extension user must enter a valid tie account code
before "Calling from TIE to CO."
TIE Incoming Used to set the number of digit to be deleted from the digits received from
Delete Digit* other PBXs via TIE lines.
TIE Incoming Used to set one through four digits number to be added to the digits
Insert Dial* received from other PBXs via TIE lines.
Description of Assigning Items
* Required when there is a need to modify the digits from other PBXs.
Function
The following functions appear on the function line of this setting screen.
1 COMMON 2 INDEX 3 4 READ 5 6 HRD CPY 7 8
Conditions
Same as “Group-Trunk Group (1/2)” screen.