Panasonic KX-T336, Справочное руководство системы

Страница: 1575 / 1605

3.02 Saving Procedure
1. First, confirm that the preparations for start of
communication between sender and receiver
have been made, like uniform communication
parameters for sender and receiver etc.
2. Select “2. Save” from the Backup Utility Main
Menu, then Save-Submenu screen appears
on the screen. (See above)
3. Before selecting an area, prepare the terminal
to receive data.
4. Select the area (1 to 3) with the submenu.
(Refer to [Submenu Description].)
5. The saving start message “Transfer start”
appears on the screen. Then the selected
data is transferred as ASCII codes from the
Main Unit to the backup device.
6. When saving is finished, the following
message appears on the screen.
“Transfer end”
7. Release the Data Receive mode of the
backup device.
[Submenu Description]
1. All Data...Saves all data, system programming
data and attendant console
database (ATT1 or ATT2), from the
Main Unit to backup device.
2. PBX Data...Saves PBX data (system
programming data) from the Main
Unit to backup device.
3. ATT Local Data .....Saves the database of
attendant console (ATT1 or
2) from the Main Unit to
backup device.
Note:
From software version 9.5X and above, the
system can hold only one of two attendant
console databases (ATT1 or 2) at a time.
If both databases of ATT1 and 2 should be
saved/loaded respectively (e.g. Tenant Service),
follow the procedure below.
Save
(1) ATT1
→
System
→
Backup Device (Data 1)
(2) ATT2
→
System
→
Backup Device (Data 2)
Load
(1) Backup Device (Data 1)
→
System
→
ATT1
(2) Backup Device (Data 2)
→
System
→
ATT2
Saving/Loading of data between ATT1/2 and
system can be done in ATT Local Mode.
Refer to Section 13 “Attendant Console –
Local Mode” for further information.
16-B-4
(50195)
Save - Submenu OFL BCK LIN DIR
1
COMMON
2 3 4 5 6 7 8
+ + + +
1. ALL Data
2. PBX Data
3. ATT Local Data
=>