Panasonic KX-T336, Справочное руководство системы

Страница: 1402 / 1605

13-C-5
4.00 SET Command
Description Used to register or change the entries in the Speed Dial Dictionary.
If newly registered speed dial code has been already registered,
previous entry will be overwritten by the new one.
Up to 200 entries (001 to 200) can be registered.
Input Format SPD > SET speed dial code/name
Input Example To store the speed dial code “120” and the name “James,” enter :
SPD>SET 120/James
If the speed dial code 120 has already been stored, the preset
name is changed to James.
Display Example To store the speed dial code 100 and the name “Bob” (when the
speed dial code 100 has not been stored before) :
SPD> SET 100/Bob
set data
No.
100
name
Bob
(1)
DELETE
(2)
LIST
(3)
SET
(4)
HELP
(
C
R
)
*****
Total 1 entry
*****
SET complete
Conditions A speed dial code should be three digits (001 to 200).
A speed dial name consists of up to 20 characters including letters,
numbers and special characters (except ",
*
, /, ~).
The beginning of the name should be a letter.
Make sure not to insert a space into each sub command of speed
dial code and name.
For example entering : SET 100/ABC Food displays an error
message after pressing the RETURN key.
However, it is possible to use special characters such as “-” to
separate words as “ABC-Food.”
Only one speed dial name can be stored for one speed dial code.
Usage of Wild Card Character
One character “*” can be used as a wild card character which
substitutes any character in that position.
(6)
APPEND
(7)
APPEND
(8)
END
(
C
R
)
(5)
HELP(CR)