Panasonic KX-T336, Справочное руководство системы

Страница: 1138 / 1605

10-C-3
(70695)
Item
Number
Input Value Assigning Items
Continued
12 : E-1 (E1 DIGITAL TRUNK CARD)
13 : AGC (Automatic Gain Control) card
14 : DISA (Direct Inward System Access) card
15 : OPX (Off Premise Extension) card
16 : ATLC (Attendant Console Line Circuit) card
17 : DPH (Doorphone Circuit) card
18 : RMT (Remote Circuit) card
19 : OHCA (Off-Hook Call Announcement) card
(
◆
06: GCOT is available for U.S.A. and Canada only.)
Conditions
If “SLA” command is entered without index number, all physical slot numbers (except 113 and 115) will be
displayed in ascending order (from 101 to 315).
It is impossible to select Index No.113 and 115, because Index No.113 is fixed to CPU card and 115 is
fixed to T-SW card.
If Index No.114 is selected, assignable input value is limited to “00: none” or “19: OHCA.”
T-1/E-1 card should be assigned to FS01, 05 or 09 of any shelf.
• One T-1 card occupies three slots. If you assign a T-1 card to FS01, FS02 and FS03 are not available
for other cards. “ ” is displayed in these two slots and the cursor skips them.
• One E-1 card occupies four slots. If you assign an E-1 card to FS01, FS02 through FS04 are not
available for other cards. “ ” is displayed in these three slots and cursor skips them.
If no CO trunk card is assigned, it is not possible to program “CO Line (COL).”
If AGC card is not assigned, “Automatic Gain Control (AGC)” cannot be programmed.
If DPH card is not assigned, “Doorphone (DPH)” cannot be programmed.
If ATLC card is not assigned, it is not possible to program “Attendant Console (ATT)” and
“Attendant Queue Priority (AQP).”
If DISA card is not assigned, it is not possible to program “DISA (DIS)”, “DISA Code (DIC)”
and “DISA Password (DIP).”
If DID card is not assigned, it is not possible to program “DID (DID).”
When assigning a card, the card status is Out of Service (OUS). When using the card, the
card status should be set to In Service (INS).
For “In Service (INS)” and “Out of Service (OUS)”, refer to Section 8-F-3.00 “In Service
(INS)” and Section 8-F-4.00 “Out of Service (OUS).”
For confirming whether card status is INS or OUS, refer to Section 15-F-1.02 “Card Status
Screen.”