Panasonic KX-T336, Справочное руководство системы

Страница: 384 / 1605

3-F-76
(70695)
14.02 Calling from TIE to CO
Description TIE Lines can be used to minimize the cost of calls to a distant location outside
of the TIE Line Network. A long distance call from one location may be a local
call from another location. This fact must be taken into consideration before
making a long distance call.
If the destination of the long distance call is outside of the TIE Line Network,
extension users first call to a distant PBX via TIE Line and then can make a
local CO call to the final destination through that PBX.
A Network of TIE Lines
No.
01
02
:
Code
951
Delete
Digit
0
Insert
Dial
01
10
02
Trunk Group Hunt Sequence
Call Flow
1. Ext.100 dials 84-951-9 (TIE Trunk Access Code + PBX Code + CO Access
Code).
2. Ext.100 is required to enter a TIE account code*.
3. Ext.100 hears dial tone from an idle CO line of PBX-2.
4. Ext.100 dials xxx-xxxx (phone number of the outside party).
*Step 2 is required when “TIE Forced Account Code” Mode is set to “Yes” at
PBX-2.
Programming example: To make up the TIE Line Network above, the following system programming is
required at PBX-1 and -2 respectively.
PBX-1 • System - Operation (1/3) (9-D-1.01, 10-C-4.00)
PBX Code: 950
• Special Attended - TIE Line Routing Table (9-K-4.00, 10-C-65.01)