Panasonic GTWIN, Справочное руководство

Страница: 81 / 297

GT Panel System Menu
GTWIN Reference Manual
80
2.7 FP Monitor
With FP Monitor, you can check and control an FP series PLC connected to the GT. The
following functions are available:

Read and write system registers

Read and write registers (bit and word data)

Force registers on/off

Monitor shared memory

Monitor error status

Manage passwords
FP Monitor supports all FP series PLCs developed since the mid 1990s. It does not support
older models, e.g. FP-1, FP-M, etc.
User memory required (FROM)
The user memory required by the FROM for FP Monitor depends on the GT model.
GT model User memory required
GT02 146kb
GT02L 123kb
GT05M, GT05G, GT32M 264kb
GT03-E, GT05S, GT32T,
GT32-R, GT32-E
329kb
GT12 183kb
2.7.1 Installing FP Monitor on the GT
Before you can use FP Monitor, you need to transfer the FP Monitor screens to the GT. There
are two methods to transfer the FP Monitor screens:

Via GTWIN

Via SD memory card
Via GTWIN
1. File

Transfer
2. Activate the checkbox "FP Monitor"
You can activate other checkboxes if you wish to transfer other data, too.
3. Check that "Direction" is set to "GTWIN->GT"