Panasonic GTWIN, Справочное руководство

Страница: 55 / 297

Introducing GTWIN
GTWIN Reference Manual
54
Item Description
Set GT station no. Set the GT station no. to which you wish to transfer the GT configuration.
Be sure to assign the station no. 0 to one GT unit!
Control device The address where information regarding GT link is stored (see "How GT
Link Functions" on p. 55).
Priority mode In both cases, writing to the PLC always has high priority, and the GT must
obtain the token before it can communicate.

Display priority . each GT station completes all command and
response operations necessary for its screens before passing the token
to the next station.

Operation priority : the GT station processes 1 operation at a time,
then passes the token to the next station.
Momentary switch You can select whether pressing a momentary switch establishes
exclusive communication between that GT station no. and the PLC. During
"exclusive communication", there is no communication with other GT
stations.
Exclusive communication with PLC
when operating touch switch You can select whether pressing any touch switch establishes exclusive
communication between that GT station no. and the PLC for the time
specified. During "exclusive communication", there is no communication
with other GT stations.
Display message in stand-by mode Until the station obtains the token, it is in "stand-by mode" and cannot
communicate. Activating this option displays a message indicating this.