Panasonic GTWIN, Справочное руководство

Страница: 23 / 297

Introducing GTWIN
GTWIN Reference Manual
22
GT Configuration dialog
If you click [Initialize] and then [OK], all settings except the drive settings will be
reset to the default (factory) values.
The following table describes what each tab is for. The settings for each tab are described in
the corresponding sections.
Tab Description
Basic Setup (see p. 23) Specify basic items for the GT unit, e.g. the basic communication area to
the PLC.
Communication Parameters (see
p. 26) Specify communication parameters between the GT unit and a PLC or
between the PC (GTWIN) and the GT unit.
PLC Multiple Connection (see p.
28) If you select "Yes", you can specify the unit number and name for multiple
Panasonic FP series PLCs connected to the GT.
Auto-Paging (see p. 31) Specify when to switch screens.
Start-up Screen (see p. 31) Specify which screen is displayed and how long it is displayed when the GT
is booted.
Setup 1 (see p. 32) Enter settings for the clock, backlight, touch sounds, multi-language
exchange, etc.
Setup 2 (see p. 35) Depending on the GT model, either enter settings for the through function or
the SD memory card.
Hold Device Value (see p. 38) Specifies which PLC (Panasonic FP-Series PLCs only) and GT device
values are held when power is turned off.
Recipe (see p. 39) Specify recipe control device for the GT.