6-2. How to Read Special Internal Relays(R) & Special Data Registers(DT)
69
[Hexadecimal]
To change the number system to hexadecimal decimal or binary, press the
key.
Note :
[Binary]
To change the number system to binary from decimal or hexadecimal, press the
key and then
press the
key.
Note :
4) If you want to monitor the data in the previous address or the next address, use the
or the
key
5) If the
key pressed twice in succession, you can select another word special internal relay or special data
register using the same procedure as described in step 3).
6) If the
key is pressed, the FP Programmer will exit from the OP 8 mode.
ACLR
(HELP)
CLR
SRC
READ
• On the AFP1112 and the AFP1112A FP Programmers, the key is used in the same
as the key on the AFP1114.
SHIFT
SC
(BIN)
K/H
• When the data is displayed in hexadecimal, the letter “H” is displayed on the display of the
FP Programmer.
(BIN)
K/H
SC
SHIFT
SC
