5-2. Error Flowchart
59
2)P/W PC Link Function Not Available Flowchart
Is the unit set in PC Link Mode?
Please contact us
Set the Mode Selector Switch 1(MODE SW. 1) to OFF and
turn OFF the power . Then, apply the power again.
Is the allocation
of the PC Link Area performed
properly?
Is there any PC
Link send area overlap?
(Is the ERROR 2
LED ON?)
Is there any station
number(UNIT NO.) overlap?
(Is the ERROR 2
LED ON?)
Is the station number
(UNIT NO.) in the range
of 01 to 16?
There si a unit whose
P/W PC Link function
is not available.
Go to the "PC Link Send Area Overlap Flowchart".
Go to the "Communication Error Flowchart".
First, check the source unit whose
data cannot be transferred.
Allocate the PC Link Area and start again.
Does a
communication error occur?
(Is the ERROR 2
LED ON?)
Is the allocation of the PC Link
Area perfermed prorperly?
Does a communication error occur?
(Is the ERROR 2 LED ON?)
Then, check the destination unit.
Go to the "Communication Error Flowchart".
Set the station number(UNIT NO.) in the range (01 to 16)
so that there is no overlap.
Allocate the PC Link Area and start again.
NO
YES
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
NO
YES
NO
YES
Go to the "Station Number(UNIT NO.) Overlap Flowchart".
