4-4. Remote Programming
44
4-4.Remote Programming
The Remote Programming is one of the functions available for the W Type(Wire) Link System.
In the W Type(Wire) Link System, programming, system register setting and readouts of data from remotely
located Programmable Controllers can be performed from the Programmable Controller closest to you using the
programming tools.
This function is available among all of the stations(max. 32 stations) in a network.
Notes :
Remote Programming Configuration Example
• This function can be performed among all the stations(max. 32) in a network.
• A maximum of 3 W Type(Wire) Link Units can be installed on a Master Backplane.
Each CPU can control a maximum of 3 P/W Link units.
The P/W Link units area : P Type(Optical) Link Unit, W Type(Wire) Link Unit,
C.C.U.(Computer Communication Unit), C-NET Link Unit
• The P/W Link units on one CPU are assigned as P/W LINK 1, P/W LINK 2 and P/W LINK 3
starting with the closest to the CPU.
FP3 Programmable Controller
(whose program will be
modified.)
FP3 Programmable Controller closest to you
Programming Tool
FP Programmer
II
NPST-GR
[Station number(UNIT NO.) 01]
[Station number(UNIT NO.) 02]
[Station number(UNIT NO.) 10]
[Station number(UNIT NO.) 25]
FP3 W Type(Wire) Link Unit
FP3 W Type(Wire) Link Unit
FP3 W Type(Wire) Link Unit
FP3 W Type(Wire) Link Unit
