Troubleshooting
VQT4G51
109
Cannot play back.
• The disc is dirty. (
>
10)
• The disc is scratched or marked.
•
[BD-R]
[BD-RE]
Set “Play Video ( AVCHD ) on BD-RE / BD-R” to
“On” and the playback may be possible (
>
86,
91).
• The disc may not be able to play back if it was
not finalized or a Top Menu was not created on
the equipment used for recording.
• When the
icon is turned grey on the
DIRECT NAVIGATOR screen, the playable
period has ended and the title is copy protected
(Copying is prohibited). (
>
15, 39)
• Depending on the encrypted service, it may not
be possible to play back certain titles if they
have been recorded without being decrypted.
Audio and video momentarily pause.
• DVD-R DL and +R DL discs have two writable
layers on one side. Video and audio may
momentarily cut out when the unit is switching
layers.
BD-Video or DVD-Video is not played.
• Ensure the disc is for the correct BD-Video
region code or DVD-Video region number, and
is not defective.
Image for the Quick View is not smooth.
• Image may not be played back smoothly in case
of DR, HG, HX, HE, HL, HM mode titles,
AVCHD format titles or BD-Video.
Cannot play the disc on other players.
•
[BD-RE]
[BD-R]
When these discs cannot be
played back on other Blu-ray Disc players, etc.
(e.g., title recorded with HE-AAC audio format),
convert the recording mode to play them back.
(
>
51, File Conversion)
•
[DVD-R]
[DVD-RW]
[+R]
[+RW]
The disc must be
finalised or have a Top Menu created (
>
79).
•
[DVD-R]
The disc created in AVCHD format can
only be played back on AVCHD compatible
equipment.
The available recording time does not
increase even after deleting titles on the disc.
•
[BD-R]
[DVD-R]
[+R]
Available space on the disc
does not increase even after deleting titles.
•
[DVD-RW]
[+RW]
Available space on the disc
increases when you delete the last title.
Cannot edit.
• You may not be able to edit on the HDD if there
is no available space. Delete any unwanted
titles to create empty space. (
>
48)
Cannot create a playlist.
• Creation or editing of playlists cannot be done
on this unit.
Play
You have forgotten your rating PIN.
• The rating level returns to the factory preset.
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• “00 RET” is displayed on the unit’s display.
2 Repeatedly press [
1
] (right) until “03 VL” is
displayed on the unit’s display.
3 Press [OK].
• “INIT” is displayed on the unit’s display.
Edit
DMR-BCT820_720_721EG_eng.book 109 ページ ２０１２年８月１日 水曜日 午後５時１８分
