Recording
VQT4G51
35
Timer recording
To use TV Guide system
Refer to “Using TV Guide system”. (
>
28)
To edit the timer recording on the TV Guide
screen
1 Select the programme to edit, then press the
red button.
2 Select “Timer Rec Edit”, then press [OK].
3 Go to step 3 on page 36.
To cancel a timer recording on the TV Guide
screen
1 Select the programme to cancel, then press
the red button.
2 Select “Timer Rec Cancel”, then press [OK].
(“
F
” disappears)
Operation during Recording
Refer to “Operation during Recording”. (
>
32)
• Some broadcasters may not send programme information.
When programme information is not displayed correctly,
use manual timer recording. (
>
36)
• The receipt of the TV Guide data via Set Top Box is not
possible.
• When timer recording from the external equipment, use
manual timer recording. (
>
36)
• You can set the start and finish time to make the timer
recording work successfully. (
>
86, 92, Timer Record Start
Buffer, Timer Record Stop Buffer)
1
On the TV Guide screen:
Press the blue button.
2
Select the item, then press [OK].
To return to the previous TV Guide list
Select “All DVB Channels” in step 2.
• Category may not be assigned correctly depending on the
programme information.
• This operation will only record to built-in HDD.
• This unit can record two programmes being
broadcasted at the same time.
• About CI Plus restriction (
>
15)
• Notes for recording of an encrypted broadcast
(
>
33)
Preparation
If you want to change the recording mode:
Press [REC MODE] and select the recording
mode, then press [OK].
1
Press [GUIDE].
TV Guide screen appears.
2
Select the programme, then press the
red button.
The timer icon “
F
” (red) is displayed.
• If on-screen instructions are displayed,
follow them.
Page Down
Information
Page Up
Category
+24 hours
Timer Rec.
SUN 01.01
TV Guide
8:00 - 9:45
SUN 01.01.2012 8:05
Category: All DVB Channels
8:00
8:30
9:00
9:30
10:00
10:30
OK
RETURN
To select the programmes of a specific
category
DMR-BCT820_720_721EG_eng.book 35 ページ ２０１２年８月１日 水曜日 午後５時１８分
