Recording
VQT4G51
31
Recording TV programmes
Recording
• This operation will only record to built-in HDD.
• This unit can record two programmes being
broadcasted at the same time.
• About CI Plus restriction (
>
15)
• Notes for recording of an encrypted broadcast
(
>
33)
1
Select the channel to record.
2
Press [REC MODE] and select the
conversion mode, then press [OK].
• This unit will record the programmes in DR
mode once, and then automatically
convert to the selected recording mode
while this unit is in standby.
• Recording mode (
>
8)
• The conversion mode set here is used
as an initial value for the next recording.
3
Press [REC
¥
].
Recording starts.
• “REC1” or “REC2” will light on the unit’s
display.
HG
HX
HE
HL
HM
XP
SP
LP
EP
Off (DR)
Conversion Mode Setting
OK
RETURN
HDD Remain:
(DR)
m
h
High
Definition
Data Size
Large
Small
Large
Small
Standard
Definition
4
Select “Automatic Stop”, then press
[OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
• You can also select “Recording Time” or
“Continuous recording”. (
>
below)
To set the recording time
1 Select “Recording Time” or “Continuous
recording” in step 4 (
>
above).
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with
[
2
,
1
].
Continuous recording:
The recording is continued until you press
[STOP
∫
].
2 Press [OK].
Automatic Stop at 8:45
REC1/OTR
Recording Time
Continuous recording
30 min
8:00 - 8:45
DMR-BCT820_720_721EG_eng.book 31 ページ ２０１２年８月１日 水曜日 午後５時１８分
