Getting started
VQT4G51
22
Settings
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
4
Select the channel number allocation, then
press [OK].
• For German and Austria:
Normally set to “Preset Channel Number”.
• For Switzerland:
Normally set to “Operator’s Channel
Number (LCN)”.
5
Select “Start Auto Setup”, then press [OK].
• Frequency and Network ID settings may be
necessary depending on the cable
provider. For details, consult the cable
provider.
6
When tuning is completed, press [OK].
Easy Setting
2
Press [
Í
] on the remote control or [
Í
/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3
Follow the on-screen instructions and make
the following settings.
• Language
• Country
• To change channel allocation, restart Auto Setup in
Setup menu and change channel number allocation
selection. (
>
89)
• Frequency
Auto
The preset frequency will be
automatically used.
Manual
Enter the frequency specified by your
cable provider with number buttons.
• Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
Auto Setup starts.
(This operation may take some time.)
e.g.,
Clock will be set automatically.
If the clock setting screen appears, set the
time manually (
>
100, Clock).
Auto Setup
Progress
This will take about 3 minutes.
No.
Channel Name
Type
Quality
Free TV: 0
Pay TV: 0
Radio: 0
Searching
0%
100%
DMR-BCT820_720_721EG_eng.book 22 ページ ２０１２年８月１日 水曜日 午後５時１８分
