Getting started
VQT4G51
13
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
Main unit
Pull to flip down
the front panel.
SD card
USB memory
Press [
<
OPEN/CLOSE] to open the tray and insert or remove a disc.
1
Standby/on switch (
Í
/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2
Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
3
CALL LED
• The LED will light up when this unit receives
incoming call etc. of the video
communication. (
>
77)
4
Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
5
Open/close disc tray
6
Disc tray
7
USB port
8
SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
9
Stop
:
Start play
;
CI (Common Interface) slot (
>
14)
<
CI module eject button (
>
14)
=
[BCT820]
Blue LED
• It is possible to set the LED to turn on/off.
(
>
95, Blue LED)
>
Display
1 Drive (HDD, BD or SD) indicator
2 Disc indicator
3 Copying indicator
4 USB port indicator
5 SD card slot indicator
6 EXT LINK indicator
7 Timer recording indicator
• This indicator lights up when the timer
recording standby is activated.
8 Remote control signal indicator
9 Main display section indicator
- Current time
- Playback counter
- Various messages (
>
112)
10 Playback indicator
PLAY
COPY
EXT -L
SD
USB
HDD
SD
BD
1
2
5
6
7 8
4
3
9
10
DMR-BCT820_720_721EG_eng.book 13 ページ ２０１２年８月１日 水曜日 午後５時１８分
