Convenient functions
VQT4G51
90
Changing the unit’s settings (Setup)
Manual Tuning
You can add new channels manually.
1 Adjust the frequency, symbol rate and service
ID. (For details, consult the cable provider.)
• Adjust the frequency by checking the signal
strength and signal quality displays.
2 Select “Start scan”, then press [OK].
• The set channel is displayed in the table.
Update Channel List
You can update the channel list to the latest one.
Child Lock
• PIN is required to change. (
>
27)
Child Lock List
You can restrict the viewing of channels and
playback of titles. You can lock each channel
or AV input.
1 Select the channel or AV input to lock.
2 Press [OK].
is displayed.
• Press [OK] again to cancel.
• Green: Lock all channels.
• Yellow: Unlock all channels.
Parental Rating
You can restrict the viewing and recording of
channels unsuitable to children.
Set a ratings level to limit broadcast viewing
and playback.
• Follow the on-screen instructions.
Signal Condition
You can check the quality and strength of
signals.
Press [CH
W X
] to select the channel.
• Signal Quality:
Red bar: Bad
Yellow bar: Poor
Green bar: Good
• When the signal is too strong (red bar), reduce the CATV
signal. (For details, consult your dealer or the cable
provider.)
• When the signal is weak, check that the current broadcast
channel is correctly broadcasting.
Preferred Language
Select the language for multi broadcast.
If the selected language is not available, the
original language will be selected.
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is
added.
Channel Name
Signal Condition
RETURN
Channel Up
Channel Down
Signal Strength
100%
Signal Quality
Parameter
MHz,
Network Name
QAM,
kS/s
100%
Bit Error Rate
DMR-BCT820_720_721EG_eng.book 90 ページ ２０１２年８月１日 水曜日 午後５時１８分
