Convenient functions
VQT4G51
100
Changing the unit’s settings (Setup)
Automatic Standby after Copy
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (
>
56, Copying from
media other than HDD with DIRECT
NAVIGATOR, Copying titles with copying
list).
RF OUT ( CATV Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby mode
(When “Power Save in Standby” is activated).
• If “On” is selected, the broadcasting signal
is output from this unit.
Remote Control
Change the remote control code on the main unit
and the remote control if you place other
Panasonic products close together.
• Use “BD 1”, the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the
number button ([1] to [6]) for more than
5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
• Operation is possible only with Panasonic
remote controls with “IR6” printed at the bottom
when the remote control code of this unit is set
to “BD 4”, “BD 5” or “BD 6”.
IR6
BLU-RAY DISC RECORDER
IR6
IR6
Clock
If the time is not set correctly, use the settings
listed in the method below.
• Automatic
This unit usually obtains time and date
information from digital broadcasts.
• Time Zone
When the time is not correct, set “Time Zone”.
(GMT - 6 to + 6)
• Manual Setting
1 Select “Off” of “Automatic”, then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the
settings.
• When the clock is set manually, you cannot perform
playing/recording/PAUSE LIVE TV/REWIND LIVE TV of
the programmes that are copy protected (Copying is
prohibited). (
>
15)
PIN Entry
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number
buttons.
2 Enter the new 4-digit PIN with the number
buttons.
• Make a note of PIN in case you forget it.
e.g.,
3 Press [OK].
System Update
Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (
>
102) are
downloaded automatically at the time you
have specified.
OK
Remember the PIN.
PIN Entry
0
0
0
0
DMR-BCT820_720_721EG_eng.book 100 ページ ２０１２年８月１日 水曜日 午後５時１８分
