Panasonic DBS Series, Руководство по программированию

Страница: 99 / 130

Panasonic Digital Business System - Programming Manual
April 1997 Issue 15
99
Hunt Group Type CPC-EX 1.0
FF4 4# (1-24)# 1# (0-2)#
(1-24)# (0-2)#
Hunt group number 0 Terminate
1-16 in pre CPC-EX 1 Circular
1-24 in CPC-EX and later 2 Cyclic
Sets the group type for hunt groups 1 to 24. For Terminate and circular options refer to FF4-4#-(1-
16)-1# above. New options are eplained below.
The hunt group facilities have been extended. The DBS will now support up to 24 hunt groups of
up to 32 member extensions. Cyclic hunting and No Answer hunting ( ringing hunting ) are now
available for internal calls directed at hunt groups according to programming.
Cyclic Hunting The first call will hunt from member 1 upwards until a free extension is
located and ring there. The next call will begin to hunt from the member
extension following the last one which received a cyclic hunt call, until a
free extension is located, and so on for successive calls to the group.
When the last member is reached hunting continues from member 1 and
the cycle repeats. This will give an even call distribution across the
members of the hunt group.
To operate Cyclic Hunting the hunt group type must be set to ‘cyclic’ and
the first extension assigned to a virtual extension number ( i.e. An
extension which is not installed or covered by spare extension card
capacity) or a permanently busy extension and all calls directed to this first
member extension.
No Answer Hunting An internal call will ring on a member extension, and if unanswered will
move onto the next extension and continue to do this until answered or
transferred to a non No Answer Hunting group.
Hunt Group To Hunt Group Transfer CPC-EX 1.0
FF4 4# (1-24)# 2# (1-24)#
(1-24)# (1-24)#
From Group To Group
Select the next hunt group to transfer calls to when the first hunt group is busy
Hunt Group Members Setting CPC-EX 1.0
FF4 4# (1-24)# (3-34)# NNNN#
(1-24)# (3-34)# NNNN#
Hunt Group Member 1 - 32 Member Extension
Places extensions into hunt groups. An extension can only belong to single hunt group or
coverage group.