Panasonic Digital Business System - Programming Manual
April 1997
Issue 15
80
E&M Dial tone send
3.1
[I/C DIAL TONE]
FF2-2#-(1-3)#-1#-(0-1)#
(1-3)#
(0-1)#
E&M Group Number
0#: Dial tone not sent
1#: Dial tone sent
This setting specifies whether or not to send internal dial tone out across a network connection.
Related step
FF2 3# (1-8)# 2# , E&M trunk group number
E&M tenant group
3.1
[TENANT GROUP NO]
FF2-2#-(1-3)#-2#-(1-8)#
(1-3)#
(1-8)#
E&M group number
1#: Tenant group 1
2#: Tenant group 2
3#: Tenant group 3
4#: Tenant group 4
5#: Tenant group 5
6#: Tenant group 6
7#: Tenant group 7
8#: Tenant group 8
This step specifies the tenant group to use when an incoming E&M call requests and outside line.
Related step
FF2 1# (01-48)# 25# , Exchange line tenant group setting
E&M Send RAC
3.1
[DIAL DELETE]
FF2-2#-(1-3)#-3#-(0-1)#
(1-3)#
(0-1)#
E&M trunk group
0#: Send RAC
1#: Do not send RAC
Specifies whether or not to send out the route access code (RAC) as the first digit of the number
dialled when making an E&M call. This setting is for use when connecting to a system which is not
a DBS and does not require the RAC.
E&M Add RAC
3.1
[DIAL INSERT]
FF2-2#-(1-3)#-4#-(0-1)#
(1-3)#
(0-1)#
E&M trunk group
0#: Do not add RAC
1#: Add RAC
Specifies whether or not to add the route access code (RAC) of the system as the first digit to the
received digits from an E&M circuit. This is for use when the remote system is not a DBS and
does not send the RAC.