Panasonic Digital Business System - Programming Manual
April 1997
Issue 15
73
Private Line Slot Setting
3.1
[BOARD NO. SET]
FF1-10#-(1-8)#-(1-4)#
(1-8)#
(1-4)#
System
Slot Position No.
Card Circuits
Setting No.
DBS-38
1:Line 1 (Note)
Private line 1 to 3
1
2:Line/Ext
DBS-68
1:Line 1 (Note)
Private line 1 to 3
1
2:Line 2
Private line 4 to 6
2
3:Line/Ext
DBS-90
1:Line 1 (Note)
Private line 1 to 3
1
2:Line 2
Private line 4 to 6
2
3:Line 3
4:Line/Ext
D
Master Cabinet
1:Line 1 (Note)
Private line 1 to 3
1
B
2:Line 2
Private line 4 to 6
2
S
3:Line 3
Private line 7 to 9
3
1
4:Line/Ext
2
Slave Cabinet
5:Line 1 (Note)
8
6: Line/Ext
D
Master Cabinet
1:Line 1 (Note)
Private line 1 to 3
1
B
2:Line 2
Private line 4 to 6
2
S
3:Line 3
Private line 7 to 9
3
1
4:Line/Ext
Private line 10 to 12
4
5
Slave Cabinet
5:Line 1 (Note)
8
6:Line 2
7:Line/Ext
D
Master Cabinet
1:Line 1 (Note)
Private line 1 to 3
1
B
2:Line 2
Private line 4 to 6
2
S
3:Line 3
Private line 7 to 9
3
1
4:Line/Ext
Private line 10 to 12
4
8
Slave Cabinet
5:Line 1 (Note)
0
6:Line 2
7:Line 3
8:Line/Ext
This setting specifies by system size which slot is used for private circuit cards. Read down the left
hand side to the system size then across to get the slot number and across again to get the card
setting from the available options. This setting is used for E&M and AC15A private circuit cards.
Note:
1
Power on maintenance is required after programming.
2
Do not insert private circuit cards into the slots allocated for exchange line power
fail. But it can be inserted into the line slot of the slave CCU when no exchange
line card is installed.
3
In the case of DBS-180 , DBS 128 and DBS-158, a maximum of two private circuit
cards can be used in each CCU.
