Panasonic Digital Business System - Programming Manual
April 1997
Issue 15
14
Call Duration and Call Charge Display
2.x
[CALL DURATION]
FF1-2#-1#-1#-(0 or 1)#
0#: No display of call duration and call charges
1#: Display of call duration / call charges (only with meter pulsing)
This setting specifies whether the call duration / call charge are displayed on a key telephone with
a display.
Automatic flash when using REDIAL and save dial
2.x
[AUTO FLASH CONT]
FF1-2#-1#-2#-(0 or 1)#
0#: No Auto Flash
1#: Auto Flash
If the system is connected to a PBX, the PBX may see the flash time as a recall signal and put the
call on hold when the REDIAL or save dial feature is used. If this occurs the auto flash can be
removed or the flash time duration altered.
Note 1: There is no auto flash if a number isn't dialled.
Note 2: Recall signals cannot be sent whilst using the REDIAL or save dial features.
Related step FF1-3#-16# Exchange line disconnect time-REDIAL/flash
On hook transfer
2.x
[ON-HOOK TRANSF.]
FF1-2#-1#-3#-(0 or 1)#
0#: On hook transfer disable
1#: On hook transfer enable
An exchange line call can be transferred to another extension by entering that extension’s number
and placeing the handset on hook.
Note:
Un-supervised or Blind transfer allows calls to be passed to another extension regardless
of weither or not the extension is answered. Un-supervised transfer will also allow calls to
be passed to busy extensions and camped on so that the call ring the extension when it is
placed back on hook.
Note:
When using the Voice Announce Unit this step must be left in default (1#)
Auto hold by exchange line key
2.x
[AUTOMATIC HOLD]
FF1-2#-1#-4#-(0 or 1)#
0#: No auto hold
1#: Auto hold
You can put an exchange line call on system hold automatically by pressing another exchange line
key, without having to push the hold key first.
