Panasonic Digital Business System - Programming Manual
April 1997
Issue 15
15
Type of hold for non appearing exchange lines and SLTs
2.x
[NON-AP.HOLD MOD]
FF1-2#-1#-5#-(0 or 1)#
0#: Exclusive Hold
1#: System Hold
This specifies whether a call on an exchange line which is not represented on an FF key or on an
SLT is held is put on system hold or exclusive hold . It is not possible to put one non-appearing
exchange line on hold and seize another.
Note:
When using the Voice Announce Unit it is recommended that this step be left set to default
(0#) to prevent accidental pick up of the line by other system users.
Call brokering (shuttling)
2.x
[SLT FLASH CONT.]
FF1-2#-1#-6#-(0 or 1)#
0#: Get new IDT
1#: Retrieve held exchange line
On an SLT after an exchange line call is put on hold an internal call may be made, if busy tone is
received, on pressing [RECALL]key, this program specifies whether to receive internal dial tone or
to return to the held exchange line.
Related step FF3-34#, Simple telephone time break call time
Enable Second Operator Position
2.x
[ALT.ATT MODE]
FF1-2#-1#-7#-(0 or 1)#
0#: No alternate mode
1#: Alternate mode
This setting is for when 2 operator phones have been installed on the system. When the alternate
mode is set and the first operator is busy, the call is automatically transferred to the second
operator.
Internal tone/voice call (Operator)
2.x
[ATT CALL MODE]
FF1-2#-1#-8#-(0-2)#
0#: Call extension using internal ringing tone
1#: Call extension by voice
2#: Disable choices (then call is always by tone call)
When the operator is calling an extension, the call can be invoked by voice, internal ringing tone,
or set to tone call only by disabling the choices.
