Panasonic DBS Series, Руководство по программированию

Страница: 70 / 130

Panasonic Digital Business System - Programming Manual
April 1997 Issue 15
70
PAD Settings CPC-EX 1.0
FF1 6# 98# (1-31)# (0-30)#
(1-31)# Connection Type (0-30)# Level Adjustment
1# KTS - DASS 0# 0 dB
2# SLT - DASS 1# 2 dB
3# RESERVED 2# 4 dB
4# Analogue Line - DASS 3# 6 dB
5# DASS - DASS 4# 8 dB
6# - 9# RESERVED 5# 10 dB
10# DASS - KTS 6# 12 dB
11# DASS - SLT 7# 14 dB
12# RESERVED 8# 16 dB
13# DASS - Analogue Line 9# 18 dB
14# DASS - DASS 10# 20 dB
15# - 18# RESERVED 11# 22 dB
19# Analogue Line - Analogue Line 12# 24 dB
20# Analogue Line - Private Wire 13# 26 dB
21# RESERVED 14# 28 dB
22# DASS - Private Wire 15# 30 dB
23# RESERVED 16# -2 dB
24# Private Wire - Analogue Line 17# -4 dB
25# Private Wire - DASS 18# -6 dB
26# Private Wire - Private Wire 19# -8 dB
27# - 31# RESERVED 20# -10 dB
21# -12 dB
22# -14 dB
23# -16 dB
24# -18 dB
25# -20 dB
26# -22 dB
27# -24 dB
28# -26 dB
29# -28 dB
30# -30 dB
During conversations involving two lines differences in the line levels can lead to howling. To
prevent this the cross connection levels between the installed line types can be adjusted to
remove the howl. To use these setting the Synchronisation unit VB3668UK must be installed on
the CPC-EX card. The levels can be ad/_ 30 dB using these steps.
ID code-DISA access 2.x
[SET 4DIGIT DATA]
FF1-8#-(0000-9999)#
[CONF]#: Clear data
(0000-9999)#
ID Code
When this step is set the ID code stored must be entered by the caller before the system will
accept extension routing digits from an incoming DISA call.
Note: To enable remote maintenance, it is necessary to input the remote program access code
separately.
Related step FF2 1# (00-48)# 20# DISA line setting
This step has been replaced by FF1-4#-3# on CPC-EX v1.0