8m
m
MA
X
;;;;;;;;;;;
;;;;;;;;;;;
;;;;;;;;;;;
;;;;;;;;;;;
;;;;;;;;;;;
;;;;;;;;;;;
8mm
MAX
55
As
necessary
54
TMC Unit Installation
Caution
We strongly recommend that you
wear gloves for installation work to
protect yourself from injuries.
1
Attach the L-Shaped Brackets
C
on
both sides of the unit with the Tapping
Screws with Washers
@
.
2
Install the unit with Tapping Screws
A
.
3
Secure the front of the unit.
¡
Check the electrical connections by
referring to these installation instructions.
¡
Insert TMC Cable
B
to the unit.
4
1
1
2
After installation, reconnect the
negative (–) battery terminal.
If a hole is bored in a vehicle chassis for attaching this unit or
wiring, make sure there is no wire harness, gasoline tank or
anything else located near the point to be bored. In addition,
boring should be executed from outside if possible.
Warning
B
TMC Cable
Insert the connector
until “click” is heard.
C
L-Shaped Bracket
@
Tapping Screws
with Washers
A
Tapping Screws
D
Velcro Tape
When you cannot make the
holes in your vehicle.
Carpets
Peel off paper
ENG