These operating instructions describe the case of using CN-DV2300N. Basically, CN-DV1800EN can be used in much the
same fashion as CN-DV2300N. Refer to page 16 for differences in operations between CN-DV2300N and CN-DV1800EN.
These operating instructions describe the enhanced navigation functions except TMC for CN-DV1800EN users. Therefore,
some explanations are overlapped. CN-DV2300N users can ignore them.
15
Before
Use
14
i { j
i { j
i | j
i | j
ENTER key
Executes a selected item.
DEST (Destination) key
Selects a destination.
(
page 28)
POS (Position) key
Displays the current position.
(
page 24)
POP UP key
Displays the searching menu.
(
page 21)
SET UP key
Changes the settings.
(
page 40)
Battery Inserting
@
Open the
battery
compartment
cover.
A
Insert the
new
batteries.
●
Battery :
Two AA batteries (R6PU)
●
Battery life :
Approximately 5
months of normal use (when
using manganese batteries at
ambient temperatures)
●
Battery replacement :
Replace the
batteries as soon as possible
when the infrared receiver does
not respond properly to remote
control operations, or when the
remote control does not work.
Note
Match the polarity of the batteries
with the
!
and
@
marks in the
battery case.
Note
Make sure that there is not any
pressure applied to any of the
remote control buttons when
placing the remote control in the
console box. Pressure on any of
the buttons will drain the batteries.
Numeric keys
●
Numeric input
:Backspace
OK: Equivalent to
B
Close the
battery
compartment
cover.
Note
You can input the postcode using these
numeric keys (
page 30, 31).
Note
ENG