![background image](http://html.mh-extra.com/html/panasonic/bl-c210-series/bl-c210-series_operating-instructions-manual_277425055.webp)
3.
Click a trigger number (1–5).
4.
Check [Enable Image Buffer/Transfer] to enable the trigger.
5.
Select [Sensor], [Alarm1], [Alarm2], [Motion Detection], or [Sound Detection] from the pull-down menu,
then click [Next].
•
To adjust the sensitivity of the built-in sensor, see Page 81.
•
If [Alarm1] or [Alarm2], is selected, select [Rising: GND to Open (High).] (logical HIGH) or [Falling:
Open (High) to GND.] (logical LOW) for the switching characteristics of the sensor. See the Installation
Guide for details.
•
For information on how the motion detection feature detects motion and how to adjust the sensitivity
of the motion detection feature, see Page 82.
•
For information on how the sound detection feature detects sound and how to adjust the sensitivity of
the sound detection feature, see Page 84.
Operating Instructions
55
2.2 Configuring a Sensor, Alarm, or Detection Trigger
Содержание BL-C210 Series
