2.11 Adjusting Sound Detection Sensitivity
If using the sound detection feature to buffer or transfer camera images, you may want to adjust the threshold
for sound detection in order to achieve the desired results.
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Buffer/Transfer], click [Sound Detection].
3.
Observe the [Preview] area to confirm how the current settings trigger sound detection.
•
When the sound level indicator is green, the camera’s microphone is picking up sound but the volume
is not high enough to trigger the sound detection feature. When the sound level is red, the sound
detection feature is triggered.
•
Any changes you make on this page will not be reflected in the [Preview] area until you click [Save].
4.
If necessary, adjust the detection threshold by clicking the appropriate block.
5.
Click [Save], and then click [Go to Sound Detection page].
6.
Observe the [Preview] area to confirm how the new settings trigger sound detection, and repeat from step
4 if necessary.
84
Operating Instructions
2.11 Adjusting Sound Detection Sensitivity
Содержание BL-C210 Series
