![background image](http://html.mh-extra.com/html/panasonic/bl-c210-series/bl-c210-series_operating-instructions-manual_277425189.webp)
10.2 Configuring Your PC for IPv6
IPv6 is supported by Windows Vista and Windows XP Service Pack 1 or later. If using Windows XP, use the
procedure below to enable your PC for IPv6.
1.
Click [Start]
®
[All Programs]
®
[Accessories]
®
[Command Prompt].
2.
When the [Command Prompt] is displayed, enter
ipv6 install
. When installation is complete,
[Succeeded.] will be displayed.
3.
Confirm that IPv6 was successfully enabled, enter
ipconfig
. If IPv6 addresses are displayed, installation
was successful.
For Windows XP Service Pack 2 or later users
If you use Windows XP Service Pack 2 or later, the following procedure is also necessary.
1.
Click [Start]
®
[Control Panel]
®
[Security Center]
®
[Windows Firewall]
®
[Advanced] tab.
2.
Click the [Settings...] button under [ICMP].
3.
Check [Allow incoming router request], then click [OK].
Operating Instructions
189
10.2 Configuring Your PC for IPv6
Содержание BL-C210 Series
