Panasonic BL-C210 Series, Руководство по эксплуатации

Страница: 120 / 232

Accessing the camera using HTTPS
If the camera is configured for HTTPS access, it can only be accessed using HTTPS; HTTP access is not
possible. Use the following address format when accessing the camera using HTTPS.
1.
Start your PC’s web browser.
2.
In the browser’s address bar, enter
https://
followed by the IP address or host name and the port number
of the camera, then press [Enter] on the keyboard.
Example:
https://192.168.0.253:80
•
If you have registered with a Dynamic DNS service, such as Viewnetcam.com (see Page 105), enter
the URL instead of the IP address. Note that accessing the camera this way may only work when you
are accessing the camera from outside, i.e., from a PC that is not connected to the same network as
the camera.
Example:
https://***.viewnetcam.com:80
3.
When the authentication dialog is displayed, enter the user name and password, then click [OK]. The top
page is displayed.
Note
•
If the authentication dialog is not displayed, click the [Login] tab after the camera’s top page is
displayed. For more information, see Page 158.
Installing security certificates
When accessing the camera using HTTPS, a security warning is displayed if there is a security certificate that
corresponds to the camera is not installed on the PC. To prevent this dialog from being displayed, follow the
procedure below and install a security certificate.
Note
•
The value entered next to [Camera IP Address or Host Name] on the [HTTPS] screen must match the
IP address or host name used to access the camera. If this value does not match, a security warning
will be displayed when accessing the camera.
•
If the IP address or host name used to access the camera changes after installing the security
certificate, a security warning will be displayed when accessing the camera. To prevent the security
warning from being displayed, a new security certificate must be installed.
•
When configuring the camera for access from the Internet, enter the IP address or host name used to
access the camera over the Internet next to [Camera IP Address or Host Name]. In this case a security
warning will be displayed when accessing the camera over the local network.
For Internet Explorer 7/Internet Explorer 8 and Windows Vista/Windows XP
Note
•
Screens displayed when using Windows XP vary slightly from those shown below.
1.
Access the camera using HTTPS.
2.
When the security warning is displayed, click [Continue to this website (not recommended).].
120 Operating Instructions
5.2 HTTPS Settings