Panasonic BL-C210 Series, Руководство по эксплуатации

Страница: 119 / 232

5.2 HTTPS Settings
The camera supports HTTPS connections. When accessing the camera using HTTPS, data sent between the
computer and camera is encrypted, providing increased security. To access the camera using HTTPS, see
Page 120.
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Basic], click [HTTPS].
3.
Set the following parameters as desired.
a.
Under [HTTPS], select [Use HTTPS] if you want to use the HTTPS feature.
b.
If [HTTPS] is set to [Use HTTPS], enter the IP address or host name of the server that contains the
SSL key under [Certificate Information].
*1
•
Generally the camera’s IP address can be entered here.
4.
Click [Save].
•
It may take up to 5 minutes to receive the SSL key. The camera cannot be accessed using HTTPS
until the SSL key is received.
5.
When the [Success!] message is displayed, click [Restart].
•
All images buffered in the internal memory are deleted when the camera is restarted.
Note
•
When the camera is configured for HTTPS access, it cannot be accessed using HTTP. Similarly, when
the camera is configured for HTTP access (i.e., when [HTTPS] is set to [Use HTTP]), it cannot be
accessed using HTTPS.
•
When configuring the camera for access from the Internet, enter the IP address or host name used to
access the camera over the Internet next to [Camera IP Address or Host Name]. In this case a security
warning will be displayed when accessing the camera over the local network.
•
When accessing the camera using HTTPS, the following may occur.
–
Frame rate may decrease and camera response time may increase.
–
It may take a while to display images.
–
Images may break up or audio may be interrupted at the beginning of the access.
•
BL-C210A/BL-C230A only: If [HTTPS] is set to [Use HTTPS], the camera cannot be accessed from
a TV and you cannot set the camera to registration mode (see Page 172).
*1
[Space], ["], ['], [&], [<], and [>] cannot be entered.
Operating Instructions 119
5.2 HTTPS Settings