Panasonic AJ-PX5100G, Руководство по эксплуатации

Страница: 29 / 263

– 29 –
Chapter 2 Description of Parts — Status display
Status display
P2 card, battery charge level, audio level display
3
2
1
4
1 Recording media display
Displays the recording media.
[P2] P2 memory card
[mP2] microP2 memory card
2 Media remaining space indicator
Indicates the remaining free space in the P2 card for each slot using a 7-segment display and remaining time.
The P2 card remaining time indicated by a single segment is set in three or five minutes in the main menu
→ [I/F SETUP] → [BATTERY/P2CARD]
→ [CARD REMAIN/Seg]. Segments go out one segment at a time at each preset time.
@ @
NOTE
t During loop recording mode, 7 segments up to the [F] position light and are displayed in one line and the time is not displayed.
t During the simultaneous recording mode, the remaining free space in the P2 card with less space is displayed in one line.
Indicates the remaining free space in the P2 card for each slot using a 7-segment display and remaining time when either of the media remaining
space is low.
3 Battery charge level/power supply voltage display
The remaining battery charge is displayed by 7 segments and the value of the power supply voltage is displayed. When a battery with a digital
indication (% indication) is used, all seven segments up to the [F] position light if the battery charge level is 70% or higher.
When the battery charge level falls below 70%, the segments go out one by one for each 10% drop. When set [100%] in the main menu
→
[I/F
SETUP]
→
[BATTERY/P2CARD]
→
[BATT REMAIN FULL], seven segments can be set to light at 100%.
4 Audio channel level meter
When the audio channel selector switch is set to <CH1/2>, audio channel display numbers 1 and 2 are displayed, and the audio level of CH1 and
CH2 is displayed. When <CH3/4> is set, audio channel display numbers 3 and 4 are displayed, and the audio level of CH3 and CH4 is displayed.
Memory operation/status related display
2
1
1 Error code display (page 249)
2 Information display
[INTERVAL] Displayed during the interval recording mode.
[ONE SHOT] Displayed during the one-shot recording mode.
[LOOP] Displayed during the loop recording mode. Flashes when the camera cannot record. (page 75)
[P-REC]
Displayed when the main menu → [REC/PB] → [REC FUNCTION] → [PRE REC] is set to [ON]. [P-REC] flashes when recording is
continued after the tally lamp goes out.
[i-REC]
Displayed during interval recording, and flashes during recording standby.
[i] Flashes when interval recording is set.
[1-CLIP] Displayed during the one-clip recording mode. [1 * CLIP] is displayed when a clip can be recorded linked to the previous clip.
[SIMUL] Displayed during the simultaneous recording mode. Flashes when the camera cannot record.
[4G/LTE ]
Displayed when connected to 4G/LTE.
[4G/LTE ]
Displayed when not connected to 4G/LTE.
[4G/LTE ]
Displayed when there is an error in the 4G/LTE connection.
[WLAN] Displayed when the wireless LAN is operating properly.
[WLAN
!
]
Displayed when the wireless LAN is not operating properly.