Panasonic AJ-PX5100G, Руководство по эксплуатации

Страница: 134 / 263

– 134 –
Chapter 5 Playback — Thumbnail operations
Shot mark
Shot marks can be added to a clip thumbnail to distinguish the clip from others.
<SHOT MARKER> button
1
Use the cursor buttons to move the cursor over the clip to which you want to add a shot mark.
2
Press the <SHOT MARKER> button.
f A shot mark is added to the thumbnail of the clip at the cursor position.
f To delete a shot mark, place the cursor again and press the <SHOT MARKER> button.
@ @
NOTE
t You can attach a shot mark during recording.
t Add shot marks after recording stops to attach the shot mark to the most recently recorded clip.
For details, refer to “Shot mark recording function” (page 78).
t When adding a shot mark to or deleting the shot mark from a clip recorded across multiple P2 cards, do this with all these P2 cards inserted into card
slots.
t [SHOT MARK] is assigned to the <SHOT MARKER> button in the factory setting. It can also be assigned to the <RET> button in the main menu →
[CAMERA] → [SW MODE].
Text memo
You can add text memos during recording or playback. Text memos can be used to play clips at some point or break clips into chunks and copy the
necessary portions.
Adding a text memo
<TEXT MEMO> button
1
Press the <TEXT MEMO> button while recording, playing, or displaying thumbnails.
f Pressing this button while recording or playing adds a text memo to the position when the button was pressed. At this time, [TEXT MEMO] (when
successful) or [TEXT MEMO INVALID] (when unsuccessful) is displayed.
f Pressing this button while the thumbnail screen is displayed inserts a text memo in the clip thumbnail (normally at the beginning) position.
@ @
NOTE
t Up to 100 text memos can be recorded to a single clip.
t Playback may stop for a moment when the <TEXT MEMO> button is pressed. This is not a malfunction.
t You cannot record text memos during loop recording.
t [TEXT MEMO] is assigned to the <TEXT MEMO> button in the factory setting. It can also be assigned to the <RET> button in the main menu →
[CAMERA] → [SW MODE].
t You can hide the text memo indicator of a clip to which a text memo with card serial number is added. Set this in the main menu → [CLIP] →
[THUMBNAIL SETUP] → [TEXT MEMO IND]. (page 177)