Panasonic AJ-PX5100G, Руководство по эксплуатации

Страница: 122 / 263

– 122 –
Chapter 4 Shooting — Handling setting data
How to use scene file data
The content of setting data can be written to and read written data from scene file area on the camera’s internal memory. Four types of scene files can
be registered. Use of this data allows you to quickly reproduce optimum setup states.
Writing setting data for scene files
1
Select [SAVE] in the main menu → [FILE] → [SCENE], and press the jog dial button (or <SET> button).
The list of scene files currently saved in camera memory is displayed.
2
Select the file to write from the list.
The title entry screen and keyboard are displayed.
3
Enter the desired characters with the keyboard.
4
Use the jog dial button (or cursor buttons ` / { / Y / I ) to select [OK], and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
5
Select [YES], and press the jog dial button (or <SET> button).
The file is saved and the file list is updated.
Reading setting data for scene files
1
Select [LOAD] in the main menu → [FILE] → [SCENE], and press the jog dial button (or <SET> button).
The list of scene files currently saved in camera memory is displayed.
2
Select the file name to load, and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
3
Select [YES], and press the jog dial button (or <SET> button).
Loading of the file begins.
4
When the completion message is displayed, press the jog dial button (or <SET> button).
Initializing (clearing) setting data for scene files
1
Select [CLEAR] in the main menu → [FILE] → [SCENE], and press the jog dial button (or <SET> button).
The list of scene files currently saved in camera memory is displayed.
2
Select the file name to delete, and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
3
Select [YES], and press the jog dial button (or <SET> button).
Deletion (clearing) of the file begins.
How to restore menu setting status to factory setting values
The menu setting status on the camera can be returned to factory setting status.
1
Select [LOAD FACTORY DATA] in the main menu → [FILE] → [INITIALIZE], and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
If [SYSTEM RESTART] is displayed on the confirmation screen, the camera will restart after reading out is complete.
2
Select [YES], and press the jog dial button (or <SET> button).
Reading out of data for the factory setting begins.
@ @
NOTE
t Data scene files and lens files and data saved as user data is not deleted by performing this operation.