Panasonic AJ-PX5100G, Руководство по эксплуатации

Страница: 138 / 263

– 138 –
Chapter 5 Playback — Thumbnail operations
[SCENARIO] Displays [PROGRAM NAME], [SCENE NO.], and [TAKE NO.].
[NEWS] Displays [REPORTER] (name of the reporter), [PURPOSE] (purpose of shooting), and [OBJECT] (object of shooting).
[MEMO] *
2
Displays [NO.] (the number of the text memo), [OFFSET] (location of the frame where the text memo is added), [PERSON] (person
who recorded the text memo added to the clip), and [TEXT] (content of the text memo).
[THUMBNAIL] Displays the location of the frame (frame offset) and the size (height and width) of the image selected as the thumbnail image.
[PROXY] Displays information such as proxy format when proxy is added.
*1 You can select the [USER CLIP NAME] recording method. For details, refer to “Selecting the [USER CLIP NAME] recording method” (page 138).
*2 When entering [MEMO], make sure to enter [TEXT]. It is not possible to record only [PERSON] (the person inputting the memo), or [OFFSET] (the recording
position).
Checking and modifying uploaded metadata
Details of metadata uploaded from an SD memory card can be checked.
Fig. 1 Fig. 2
1
Select [PROPERTY] in the main menu → [REC/PB] → [REC META DATA].
The metadata list is displayed.
2
Use the cursor buttons to move the cursor over the item to be checked, and press the <SET> button. (Fig. 1)
Settings of the uploaded metadata can be checked.
3
While checking the settings for the metadata, use the cursor buttons to move the cursor over the item where you want to change
the setting, and press the <SET> button.
f A software keyboard screen is displayed, allowing you to modify the setting. (Fig. 2)
f While holding down the <SHIFT> button, press the cursor buttons ( ` / { ) to move to the beginning or end of the setting details to be changed.
Setting whether to record the uploaded metadata
Set [ON]/[OFF] in the main menu → [REC/PB] → [REC META DATA] → [RECORD]. This item is set to [OFF] in the factory settings.
Selecting the [USER CLIP NAME] recording method
In the main menu → [REC/PB] → [REC META DATA] → [USER CLIP NAME], select the [USER CLIP NAME] recording method from either [TYPE1] or
[TYPE2].
r [TYPE1] (factory settings)
Status of clip metadata [USER CLIP NAME] to be recorded
When clip metadata has been loaded Uploaded data
When no clip metadata has been loaded, or when setting disables recording of loaded clip
metadata
Same as [GLOBAL CLIP ID]
r [TYPE2]
Status of clip metadata [USER CLIP NAME] to be recorded
When clip metadata has been loaded
Uploaded data + [COUNT] value*
When no clip metadata has been loaded, or when setting disables recording of loaded clip
metadata
Same as [CLIP NAME]
* The [COUNT] value is indicated as a four-digit number.
The [COUNT] value is incremented each time a new clip is generated, if clip metadata has been loaded and [TYPE2] has been selected as the recording method.
The [COUNT] value can be reset using the following method.
When selecting [PROPERTY] in the main menu
→ [REC/PB] → [REC META DATA], and selecting [USER CLIP NAME], the following screen is displayed. Move
the cursor over [COUNT RESET], and press the <SET> button to reset the [COUNT] value to 1.